Starting A Switch; Stop Procedure - Alaxala AX2200S Series Configuration Manual

4 Login Procedures

4.2.2 Starting a switch

The following table describes the procedures for starting and restarting the Switch.
Table 4-4 Start and restart procedures
Start method
Power on
Manual restart
Command restart
If the ST1 LED turns red when you start or restart the Switch, see the Troubleshooting
Guide. For details about the LED indications, see the Hardware Instruction Manual.
The Switch boots from the memory card if you start or restart the Switch from an inserted
memory card that contains the software image file

4.2.3 Stop procedure

Powering off the Switch while files are being accessed might corrupt the files. Make sure
that no users are logged in before you power off the Switch.
44
Description
Starts the Switch from the powered-off status.
Resets the Switch after a failure.
Resets the Switch after a failure.
Procedure
Turn the power switch on.
Press the RESET button.
Execute the
operation command.
k.img .
reload