Rep 8.1.2 Lvps (Scc) - Xerox WorkCentre 5020 Service Documentation

REP 8.1.2 LVPS (SCC)

Parts List on PL 8.1
Removal
To avoid personal injury or electrical shock, ensure that the machine is completely off
before disassembling or adjusting. Turn OFF the power and unplug the machine.
1. Remove the Rear Cover (REP 9.2.1).
2. Remove the Right Cover (REP 9.2.2).
3. Remove the AIOC PWB (REP 8.1.1).
4. Remove the PWB Bracket (Figure 1).
1 Remove the screws (4).
2 Remove the PWB Bracket.
Repairs and Adjustments
REP 8.1.2
WARNING
Figure 1
5. Remove the IIT Ground Plate (Figure 2).
1 Remove the Screws (4).
2 Remove the IIT Ground Plate.
Figure 2 Removing the IIT Ground Plate
July, 2007
4-50
Initial Issue
WorkCentre 5020