REP 1.1 LVPS Bracket
Parts List on
PL 9.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
PWBs can be damaged by an electrostatic discharge. Observe all ESD procedures to avoid
component damage.
1.
Remove Rear Cover
(REP
14.2).
2.
Remove the High Voltage Power Supply Chassis
3.
Release 6 harness clips.
4.
Remove the LVPS Bracket
(Figure
a.
Disconnect harness connectors (4).
b.
Loosen Lower screws (2).
c.
Remove the upper screws (2) and remove the LVPS Bracket.
Harness connectors
Upper
Screw
3.3 VDC
LVPS
Lower
Screw
Figure 1 Removing the LVPS Bracket
Initial issue
DC 3535/2240/1632, WC M24
WARNING
CAUTION
(REP
1.6).
1).
Harness connectors
Upper
Screw
5 VDC
LVPS
Lower
Screw
09/03
4-3
Repairs and Adjustments
REP 1.1