44-29 Feed Gear/19 Idle Gear - Xerox Phaser 3330 Service Manual

44-29 Feed Gear/19 Idle Gear

Parts List 3.6 Feed Drive
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section
2. Undock the printer from the optional Tray 2 Base.
3. Remove the Main Drive Assembly
4. Remove the Feed Drive Assembly
5. Remove the Feed Gear
Feed Drive, PL 3.6.3).
Xerox Internal Use Only
(page
(page 4-58).
(page 4-41).
(Parts List 3.6 Feed Drive, PL 3.6.2) or the Bypass Idle Gear
4-3).
(page 4-8).
Phaser 3330 and WorkCentre 3335/3345
Service Parts Disassembly
(Parts List 3.6
s3320-266
4-45
Service Manual