Table of Contents
Advertisement
35.2.2
Requirements
Configure connect to a
server step-by-step
NTRIP via Internet
Configuring to Connect to a Server
The configurations from the previous chapter must have been completed. Refer to "35.2.1
Configuring an Access to the Internet".
The following table explains the most common settings. Refer to the stated chapter for more
information on screens.
Step
Description
1.
Select Main Menu: Config...\Interfaces....
2.
CONFIGURE Interfaces
Highlight Real-Time.
3.
EDIT (F3) to access CONFIGURE Real-Time Mode.
4.
CONFIGURE Real-Time Mode
<R-Time Mode: Rover>
<R-Time Data:> Select the type of data to be received from the
Internet.
<Port: NETx>
5.
CONT (F1) to return to CONFIGURE Interfaces.
6.
Highlight Real-Time.
7.
CTRL (F4) to access CONFIGURE Set NET Port.
8.
CONFIGURE Set NET Port
<User: Client>
GPS1200+
Refer to
chapter
22.3.4
24.8
773
Advertisement
Table of Contents
