Starting A Conference; Starting A Conference From The Conference Pane - Polycom RMX 2000 Getting Started Manual

Chapter 3-Basic Operation

Starting a Conference

Starting a Conference from the Conference Pane

3-12
There are several ways to start a conference:
• Clicking the New Conference button in the Conferences pane,.
• Dialing in to a Meeting Room.
— A Meeting Room is a conference that is saved in the MCU. It
remains in passive mode until it is activated by the first
participant, or the meeting organizer, dialing in.
For more information about Meeting Rooms, see the Polycom RMX
2000 Administrator's Guide, "Meeting Rooms" on page 2-1.
• Dialing in to an Ad Hoc Entry Queue which is used as the access
point to the MCU.
For a detailed description of Ad Hoc Entry Queues, see the RMX 2000
Administrator's Guide, "Entry Queues" on page 3-1.
To start a conference from the Conference pane:
1
In the Conference pane, click the New Conference ( ) button.
The Conference – General dialog box opens.