Defining Dhcp Server Global Settings - Motorola WiNG 5.5 Reference Manual

NetBIOS Servers
24. Refer to the DHCP Option Values
options applies to just the clients on a specified subnet.
Select the + Add Row
it from others with similar configurations. At any time you can select the radio button of an existing option and select the
Delete icon to remove it from the list of those available.
Assign a Value to each option with codes in the range 1 through 254. A vendor-specific option definition only applies to
the vendor class for which it's defined.
25. Refer to the Static Routes Installed on Clients
26. Select the + Add Row
27. Select OK to save the updates to the DHCP pool's Advanced settings. Select
saved configuration.

9.3.2 Defining DHCP Server Global Settings

Setting the DHCP Server Configuration
Setting a DHCP server global configuration entails defining whether BOOTP requests are ignored and setting DHCP global
server options.
To define DHCP server global settings:
1. Select the Global Settings
remain selected to implement the configuration as part of the access point profile.
Specify a numerical IP address of a single or group of NetBIOS WINS servers available to
DHCP supported wireless clients. Select Alias to use a network alias with the NetBIOS
server configuration. For more information see
table to set global DHCP options applicable to all clients, whereas a set of subnet
button to add individual options. Assign each a
table to set fixed routes for client destination and gateways.
button to add individual options for
tab and ensure the Activate DHCP Server Policy
Services Configuration 9 - 23
Alias on page
Global DHCP Option Name
Destination and Gateway
Reset to revert the screen back to its last
button remains selected. This option must
7-34.
to help differentiate
addresses.