Table of Contents
Advertisement
8.3.1.4 LAN Configuration Page – Manual Ethernet Configuration
Figure 28: LAN Configuration Page - Manual Ethernet Configuration
Force Configuration This option allows the user to force the speed and duplex setting of the
Ethernet interface. See warning above!
Warning: Over the air throughput will be capped to the rate of the Ethernet interface at
the receiving end of the link
8.3.1.5 Save and Restore
The save and restore feature of Canopy 150/300 Mb BH allows the system administrator to
backup the operation configuration of the wireless unit. It is recommended that this facility is
used immediately after a successful Canopy 150/300 Mb BH installation or prior to any
software upgrade. Then in the unlikely event that a Canopy 150/300 Mb BH unit has to be
replaced in the field, the replacement unit can be reconfigured by simply playing back the
saved configuration file.
To download the latest configuration file right click on the 'configuration' hyperlink ( Figure 29)
and save the cfg.canopy to the hard drive of your computer
8
There is a really annoying feature of Internet Explorer (all versions) that will always look at the
content of any downloadable file as make an assessment whether to treat the file as an ASCII or
binary file. Unfortunately the configuration file is always treated as ASCII and the browser attempts
to display it instead of downloading it. Firefox (all versions) makes no such assumptions.
Issue 1.1 April 2006
8
( Figure 30 ).
Page 64
Advertisement
Table of Contents
