Table of Contents
Advertisement
Configuring High Availability VLANs
Displaying High Availability VLAN Status and
Statistics
You can use CLI show commands to display the current configuration and statistics of high availability
VLANs on a switch. These commands include the following:
show mac-address-table port-
mac
show vlan
show vlan port
To display the status and configuration of high availability VLANs you use the
port-mac
command. To display the status and configuration of all high availability VLANs on a switch
enter:
-> show mac-address-table port-mac
A screen similar to the following will be displayed:
Port mac configuration for vlan 10
Bandwidth : 15 MB/sec
Ingress Port list:
3/5
Egress Port list:
3/9
Mac Address list:
00:DA:95:3C:44:55
00:13:14:34:5E:78
01:23:45:C1:17:21
Port mac configuration for vlan 20
Bandwidth : 15 MB/sec
Ingress Port list:
1/4
Egress Port list:
3/9
Mac Address list:
00:11:22:33:44:55
07:23:14:34:31:25
00:23:45:67:43:04
To display the status and configuration of a single high availability VLAN enter show mac-address-table
port-mac vlan followed by the VLAN's ID number. For example, to display the status and configuration
of high availability VLAN 10 enter
-> show mac-address-table port-mac vlan 10
Release 5.1.6.R02 User Guide Supplement
Displays the status and configuration of high availability VLANs.
Displays a list of all VLANs configured on the switch and the status of
related VLAN properties (e.g., admin and Spanning Tree status and
router port definitions).
Displays a list of VLAN port assignments.
3/7
3/6
8/2
3/6
June 2005
show mac-address-table
page 3-19
Advertisement
Table of Contents
