Os7700/Os7800 Mac Range Specifications - Alcatel OmniSwitch 7700 Hardware User's Manual

Hide thumbs Also See for OmniSwitch 7700:
Table of Contents

Advertisement

Managing MAC Addresses on the Switch

OS7700/OS7800 MAC Range Specifications

Number of factory-installed MAC ranges
Maximum MAC ranges allowed on the switch
Default number of MAC addresses in MAC range 1
Maximum MAC addresses allowed in MAC range 1
Base chassis MAC address
802.1X MAC address
Ethernet Management Port (EMP) MAC address
VLAN Router Port MAC addresses
MAC router modes supported
Default MAC router mode
page 2-40
1
1
32
256
Unique to each switch. The base chassis
MAC address is always the first MAC
address listed in MAC range 1.
Unique to each switch. The second MAC
address in the range is always allocated for
802.1X authentication.
Unique to each switch. The EMP MAC
address is always the last MAC address listed
in MAC range 1.
Unique to each switch. In multiple MAC
router mode, each VLAN router port is
assigned a unique MAC address. These
unique addresses are allocated from the
remaining 29 MAC addresses in the range
(index numbers 3 through 31). In single MAC
router mode, all VLAN router ports use the
base chassis MAC address. For more infor-
mation on VLAN router ports and MAC
address allocation, refer to
Multiple and single
Multiple
OmniSwitch 7700/7800 Hardware Users Guide
Chassis and Power Supplies
page
2-41.
April 2005

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch 7800

Table of Contents