Configuring Static Link Aggregation; Static Link Aggregation Specifications; Static Link Aggregation Default Values - Alcatel OmniSwitch 6600 Family Network Configuration Manual

Static Link Aggregation Specifications

Static Link Aggregation Specifications
The table below lists specifications for static groups.
Maximum number of link aggregation groups per
stack (composed of up to eight OmniSwitch 6600
Family switches)
Maximum number of link aggregation groups per
OmniSwitch 6600-U24, 6600-U24, 6600-P24, or
6602-24 switch
Maximum number of link aggregation groups per
OmniSwitch 6648 or 6602-48 switch
Number of links per group supported on a single
switch
Number of links per group supported in a stack
Range for optional group name
CLI Command Prefix Recognition

Static Link Aggregation Default Values

The table below lists default values and the commands to modify them for static aggregate groups.
Parameter Description
Administrative State
Group Name
page 12-2
30
4
8
2, 4, or 8
2, 4, 8, or 16
1 to 255 characters
All static link aggregation configuration commands
support prefix recognition. (Static link aggregation
show commands do not support prefix recognition.)
See the "Using the CLI" chapter in the OmniSwitch
6600 Family Switch Management Guide for more
information.
Command
static linkagg admin state
static linkagg name
OmniSwitch 6600 Family Network Configuration Guide

Configuring Static Link Aggregation

Default Value/Comments
enabled
No name configured
April 2006