Table 259 Aaa Control Port Multiple Host Command; Table 260 Aaa Control Port Max Hosts Command; Table 261 Dot1X Re-Authentication Command - Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
164 Confidential and Proprietary Information of ZTE CORPORATION
(V1.0)
Access Switch User Manual （Volume I）
T 2 5 9 A A A C
A B L E
Format
aaa-control port
<portlist>
multiple-hosts
{enable|disable}
Result: This allows/prohibits multi-subscriber access of the
port.
4. To set the maximum number of subscribers connected
through the
<portlist> max-hosts <0-64> in nas config mode.
shown in Table 260.
T 2 6 0 A A A C
A B L E
Format
aaa-control port
<portlist> max-
hosts <0-64>
Result: This sets the maximum number of subscribers
connected through port.
Note: A port can allow access of multiple subscribers and
each subscriber has own independent authentication and
billing processes.
command is valid only when the port allows access of
multiple subscribers.
5. To enable/disable re-authentication mechanism,
command dot1x re-authenticate {enable|disable} in nas
config mode.
T 2 6 1 D 1
A B L E O T X
Format
dot1x re-
authenticate
{enable|disable}
Result: This enable/disable re-authentication mechanism.
6. To set the re-authentication interval,
dot1x re-authenticate period <1-4294967295> in nas
config mode.
P M
O N T R O L O R T U L T I P L E
Mode
nas config
port, use command
P M H
O N T R O L O R T A X O S T S
Mode
nas config
The aaa-control port max-hosts
This is shown in Table 261.
R - C
E A U T H E N T I C A T I O N
Mode
nas config
This is shown in Table 262.
H C
O S T O M M A N D
Function
This
allows/prohibits
multi-subscriber
access of the port
aaa-control
C
O M M A N D
Function
This set the
maximum number
of subscribers
connected through
port
O M M A N D
Function
This enable/disable
re-authentication
mechanism
use command
port
This is
use