Configuring Sub Service; Command Subservice; Command Add Signature-Symbol - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
5
C h a p t e r

Configuring Sub Service

Table of Contents

Command subservice ......................................................19

Command add signature-symbol .....................................19
Command add protocol ...................................................20
Command bind flow-pool ................................................21
Command action .............................................................21
Command aging-time ......................................................21
Command show subservice .............................................22
Command subservice
This enters subservice configuration mode. Command no can be
used to clear the configuration.
DPI configuration mode with prompt to be
subservice <subservice-id>
no subservice <subservice-id>
Parameter
<subservice-id>
To enter subservice configuration mode, execute the following
commands:
ZXR10(config-dpi)#subservice 2
ZXR10(config-dpi-subservice-2)#
Command add
signature-symbol
This adds signature symbol relation for current subservice. Com-
mand no can be used to delete this relation.
Confidential and Proprietary Information of ZTE CORPORATION
Description
It is id of subservice entry, ranging from 1
to 8191. 0 indicates this subservice entry is
invalid.
ZXR10(config-dpi)#
19