Table of Contents
Advertisement
ZXR10 2900 Series User Manual
46
Confidential and Proprietary Information of ZTE CORPORATION
The detailed SSH configuration of the ZXR10 2920/2928/2952/29
36-FI refers to Basic Configuration of SSH.
Configuration through SNMP
Connection
Simple Network Management Protocol (SNMP) is the most popular
network management protocol. The user can use one NM server to
manage all the equipments on the network through this protocol.
SNMP adopts the server/client-based management mode.
background NM server serves as an SNMP server, and the fore-
ground network equipment, the ZXR10 2920/2928/2952/2936-FI
serves as the SNMP client. The foreground and background share
the same MIB management database and communicate with each
other via the SNMP.
The background NM server must be installed with the NM soft-
ware that supports SNMP. The management and configuration of
the ZXR10 2920/2928/2952/2936-FI are implemented through
the NM software.
2920/2928/2952/2936-FI refer to Basic Configuration of SNMP.
Configuration through WEB
Connection
Web is another way to implement remote management of switch
and is similar with Telnet. The user can log in to the remote switch
through the Ethernet port of the local host. The login username,
login password and administrator password must be configured on
the switch and then enable Web function. Also ping the IP address
of the layer 3 port on the switch successfully on the local host.For
configuration of IP address of the layer 3 port, see Layer 3 Basic
Configuration .
1. Create a new management user
create user <name>{admin | guest}
user <name>: the length cannot exceed 15 characters.
2. Configure login password
set user local <name> login-password <string>
login-password <string>the length cannot exceed 16 char-
acters.
3. Configure administrator password
set
user
{local|radius}<name>
<string>
admin-password <string>: the length cannot exceed 16
characters.
For the SNMP configuration on the ZXR10
The
admin-password
Advertisement
Table of Contents
