Mark Dmi Events As Read; Clear All Dmi Event Logs; Console Redirection; Com Port Address - Silicon Graphics Altix XE250 User Manual

5: BIOS Settings

Mark DMI Events as Read

Clear All DMI Event Logs

Console Redirection

COM Port Address

BAUD Rate

Console Type

Flow Control

Console Connection

5-136
Highlight this item and press <Enter> to mark the DMI events as read.
Select Yes and press <Enter> to clear all DMI event logs. The options are Yes and No.
Access the submenu to make changes to the following settings.
This item enables you to specify which COM port to direct the remote console to: Onboard COM
A or Onboard COM B. This setting can also be Disabled.
This item enables you to set the BAUD rate for console redirection. The options are 300, 1200,
2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
This item enables you to set console redirection type. The options are VT100, VT100,8bit,
PC-ANSI, 7bit, PC ANSI, VT100+, VT-UTF8, and ASCII.
This item enables you to select the flow control option for console redirection. The options are
None, XON/XOFF, and CTS/RTS.
This item enables you to decide how console redirection is to be connected: either Direct or Via
Modem.
007-5467-001