Motorola DSP56000 Manual page 217

troller causes the processor to load the opcode.
33. ACK
34. Send command WRITE PDB REGISTER, GO, no EX (01001001)
The OnCE controller selects PDB as destination for serial data.
35. ACK
36. Send the 24-bit second word of: "MOVE #saved_r0,R0" (the saved_r0 field).
After 24 bits have been received, the PDB register drives the PDB. The OnCE con-
troller releases the chip from the debug mode and the instruction starts execution.
The signal that marks the end of the instruction returns the chip to the debug mode.
37. ACK
MOTOROLA
USING THE OnCE
ON-CHIP EMULATION (OnCE) 10 - 25