Xerox DocuColor 1632 Service Manual page 357

102-348 Command Access Exception
Exceptional command access
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
Prelaunch Training/Review
DC1632/2240
(PL 18.2)
102-349 Invalid Command
Illegal command
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
6/02
2-327
(PL 18.2)
Status Indicator RAPs
102-348, 102-349