Exit Sensor Off - Xerox DocuColor 1632 Service Manual

5-116 Exit Sensor Off

The document does not deactuate the DADF Exit Sensor after the DADF Exit Sensor actuated.
Procedure
Check the following in dC330:
ï [5-115] DADF Exit Sensor
ï [5-081] DADF Exit Motor (Check Fuse F2 on DADF PWB)
The components are good.
Y N
Go to the appropriate circuit and check the component
Check the following:
ï The Exit Roll for contamination, wear and a rotation failure
ï The Exit Upper/lower Chute for deformation
ï The Eliminator for deformation
ï The Exit Roll Drive Belt for disengagement and damage
ï The DADF Control PWB for failure
Figure 1 DADF Exit Sensor CD
Prelaunch Training/Review
DC1632/2240
(PL 20.3).
Figure 3 DADF Control PWB
6/02
2-71
Figure 2 Exit Motor CD
Status Indicator RAPs
5-116