116-319 Serial
There is no serial board at the serial board initialization failure.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Reinstall the serial board.
Prelaunch Training/Review
DC1632/2240
116-320 STREAMZ Soft
Fatal error of the STREAMZ. Due to an error during the software processing, the subsequent
processes cannot be performed.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB
6/02
2-369
(PL
13.1).
Status Indicator RAPs
116-319, 116-320