Xerox DocuColor 1632 Service Manual page 232

12-170 Set Eject
The Compiler Paper Sensor did not deactuate after the Eject Motor energized.
Procedure
Enter dC330 [012-102] and press Start. Actuate and deactuate the Compiler Paper Sensor.
The display changes.
Y N
Repair the sensor as required (PL
mechanically good, check the circuit of the Compiler Paper Sensor
Check the following:
ï Eject Roll for contamination, wear and a drive failure
ï Drive Transmission Gear from the Eject Motor for wear and breakage
ï Eject Clamp for an up and down movement failure
ï Stacker Tray for foreign substance
Compiler
Paper
Sensor
Figure 1 Component Location
Figure 2 Compiler Paper Sensor CD
Status Indicator RAPs
12-170
17.10) for mechanical problems. If the sensor is
(Figure 2).
6/02
2-202
Figure 3 Finisher PWB
Prelaunch Training/Review
DC1632/2240