102-340 Interface GUAM - DM I/F
Interface failure. Incorrect parameter was detected at the I/F between the GUAM and DM.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Check the D-RAM and ROM. Replace the Control Panel
If the problem continues, perform re-installation of the software.
Prelaunch Training/Review
DC1632/2240
(PL
18.2)
6/02
2-323
102-341 Event Queue Full
Event queue full
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
(PL
18.2)
Status Indicator RAPs
102-340, 102-341