REP 6.1 ROS
Parts List on
PL 3.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Right Cover
(REP
14.3).
2.
Remove Rear Cover
(REP
14.2).
Image quality defects result if covers on ROS cleaning openings are removed.
3.
Remove ROS
(Figure
1).
a.
Carefully observe position of wiring harness for later reinstallation.
b.
Remove Harness from Harness Clips.
c.
Disconnect Harness P/Jís (2).
d.
Remove Screws (2).
e.
Pull out ROS to remove it.
Screws (2)
Harness Clips
Figure 1 Removing ROS
Replacement
After machine reassembly perform following:
1.
DC956 Belt Edge.
2.
DC685 Color Registration Control
(ADJ
Prelaunch Training/Review
DC1632/2240
WARNING
CAUTION
P/Jís
9.6).
6/02
4-41
Repairs and Adjustments
REP 6.1