REP 12.3 Entrance Sensor
Parts List on
PL 17.4
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove the H Transport Assembly
2.
Remove the following:
a.
H Transport Front Cover
(PL
17.3)
b.
H Transport Rear Cover
(PL
17.3)
c.
Stop
(PL
17.3)
3.
Remove the Entrance Upper Cover
4.
Remove the Cover
(Figure
1).
a.
Push up the hook (2).
b.
Remove the Cover, while moving it in the arrow direction.
Figure 1 Removing the Cover
Prelaunch Training/Review
DC1632/2240
WARNING
(REP
12.1).
(REP
12.17).
5.
Remove the H Transport Entrance Sensor and Top Tray Full Sensor
Top Tray Full
Sensor
Entrance
Sensor
Figure 2 Removing Entrance Sensor and Top Tray Full Sensor
6/02
4-103
(Figure
2).
Disconnect
and Remove
Sensors
Repairs and Adjustments
REP 12.3