REP 9.12 IBT Steering Drive Assembly
Parts List on
PL 1.3
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Front Cover.
2.
Remove Fuser Front Cover
(REP
14.8).
3.
Release and move Xerographic Release Lever half way down.
4.
Remove Dispenser Assembly Cover
5.
Remove Steering Drive Motor
(Figure
a.
Disconnect Motor P/J.
b.
Remove Screws (3).
c.
Pull out to remove using care to avoid damage to steering gear.
Motor P/J
Screws (3)
Figure 1 Removing Steering Drive Motor
Repairs and Adjustments
REP 9.12, REP 9.13
WARNING
(REP
9.6).
1).
REP 9.13 Agitator Motor Assembly
Parts List on
PL 4.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Front Cover.
2.
Remove Waste Cartridge
(REP
3.
Remove Fuser Front Cover
(REP
4.
Release and move Xerographic Release Lever half way down.
5.
Remove Dispenser Assembly Cover
6.
Remove Waste Toner Agitator
a.
Disconnect P/J.
b.
Remove Screws (2) and remove Waste Toner Agitator.
Screw
P/J
Screw
Figure 1 Removing Waste Toner Agitator
6/02
4-78
WARNING
9.4).
14.8).
(REP
9.6).
(Figure
1).
Prelaunch Training/Review
DC1632/2240