Xerox DocuColor 1632 Service Manual page 845

Patte
rn # Pattern Name Overview
22 Binary/Highlight PG (Highlight gradation check) Gradation pattern for highlight adjustment LUT:
LUT: C-TRA OFF IOT C-TRA OFF IOT OFF
OFF
23 Binary/Highlight PG (Highlight gradation check) Gradation pattern for highlight adjustment LUT:
LUT: C-TRA OFF IOT C-TRA OFF IOT ON
ON
24 Binary/Highlight PG (Highlight gradation check) Gradation pattern for highlight adjustment LUT:
LUT: C-TRA ON IOT C-TRA ON IOT OFF
OFF
25 Binary/Highlight PG (Highlight gradation check) Gradation pattern for highlight adjustment LUT:
LUT: C-TRA ON IOT C-TRA ON IOT ON
ON
26 IIT/FS Incre/Gradation (For separating troubles) Fast Scan direction gradation YMC process BK
pattern
27 IIT/SS Incre/Gradation (For separating troubles) Slow Scan direction gradation YMC process BK
pattern
28 Shading Data Output (For separating troubles) Shading RAM data output pattern
29 COSAC Count Mode/ (For separating troubles) 10.84mm width YMCK Vertical Stripe Pattern
YMCK Vertical Stripe
30 COSAC Count Mode/8 (For separating troubles) 21.67x10.84mm 8 Gradation Patch Pattern
Gradation Patch
31 COSAC Solid PG ALL (For development) Entire Solid Data Pattern.
AAh
32 AES L* Pass Check (For separating troubles) 32.51mm Grey + 10.84mm White, Vertical Stripe
Pattern.
33 VIPER Grid/4C (For development) 10.84mm Grid Pattern.
34 VIPER Grid/BW (For development) 10.84mm Grid Pattern.
35 FSRE Count Mode/ (For separating troubles) 5.42mm YMCK Grid Pattern.
Grid
36 FSRE Count Mode/ (For separating troubles)5.42mm YMCK Slanting Grid Pattern.
Slanting Grid
Prelaunch Training/Review
DC1632/2240
Table 1 Test Patterns
Purpose
In the gradation reproducibility of Primary color/Secondary color/
Tertiary color, the highlight parts easily varied can be checked in
details. For checking TRC.
In the gradation reproducibility of Primary color/Secondary color/
Tertiary color, the highlight parts easily varied can be checked in
details. For checking TRC.
In the gradation reproducibility of Primary color/Secondary color/
Tertiary color, the highlight parts easily varied can be checked in
details. For checking TRC.
In the gradation reproducibility of Primary color/Secondary color/
Tertiary color, the highlight parts easily varied can be checked in
details. For checking TRC.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For separating troubles. It determines the defective locations when
an error image was output. Normal: Pre IPS Asic onwards can be
determined as normal.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
For separating troubles. It determines the defective locations when
an error image was output. Normal: Pre IPS Asic onwards can be
determined as normal.
For development.
Determine the defect locations when IPS defect and ASIC poor
installation etc. has occurred.
6/02
6-81
Location
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
IPS
General Procedures and Information
dC612