Toner Cartridge (M) Near Empty - Xerox DocuColor 1632 Service Manual

Prelaunch cse training/review
Hide thumbs Also See for DocuColor 1632:
Table of Contents

Advertisement

9-411 Toner Cartridge (M) Near Empty

The Yellow Toner Cartridge is nearly empty.
NOTE: Continuous running of high density prints can temporarily deplete the toner supply.
Initial Actions
ï
Ensure that there is toner and the toner is evenly distributed in the cartridge (M).
ï
Check the ATC Sensor (M) for blockage or contaminants.
ï
Check the drive system from the Developer Drive Motor to the Developer Housing (M) for
damage.
Procedure
Enter dC330 [009-002]. The Toner Dispense Motor (M) energizes (PL 6.1).
Y
N
Go to OF 99-6 Motor Open RAP.
Enter
dC330
[009-014]. The Developer Motor energizes (PL 1.1).
Y
N
Go to OF 99-6 Motor Open RAP.
Perform
ADJ
9.3. The ATC Sensor (M) fail judgement is OK.
Y
N
Go the
9-382
ATC Sensor Failure (M) RAP.
After checking that no failures are detected during normal operation, go to call closeout.
Figure 1 Toner Dispense Motor M
Prelaunch Training/Review
DC1632/2240
Figure 2 The Developer Motor
6/02
2-151
Status Indicator RAPs
9-411

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucolor 2240

Table of Contents