REP 9.18 Lever
Parts List on
PL 5.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Front Cover.
2.
Remove Fuser Front Cover
(REP
14.8).
3.
Remove Waste Cartridge
(REP
9.4).
4.
Remove Waste Cartridge Cover
(REP
5.
Remove Inner Left Harness Cover
6.
Release and move Xerographic Release Lever down.
7.
Remove Drum Cartridges.
8.
Remove Right Cover
(REP
14.3).
9.
Remove Belt Module
(REP
9.15).
10. Remove Xerographic Release Lever (Figure 1).
a.
Remove Screw, Washer, and Hinge Pin.
b.
Remove E-Ring and Hinge Pin.
c.
Remove Xerographic Release Lever.
Screw, Washer,
Hinge Pin
Figure 1 Removing Xerographic Release Lever
Replacement
Move Xerographic Release Lever to down position before reinstalling Belt Module.
Prelaunch Training/Review
DC1632/2240
WARNING
9.3).
(REP
14.10).
E-Ring,
Hinge Pin
REP 9.19 Left Hinge/Right Hinge
Parts List on
PL 5.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Front Cover.
2.
Remove Fuser Front Cover
(REP
3.
Remove Waste Cartridge
(REP
4.
Remove Waste Cartridge Cover
5.
Remove Inner Left Harness Cover
6.
Release and move Xerographic Release Lever down.
7.
Remove Drum Cartridges.
8.
Remove Right Cover
(REP
14.3).
9.
Remove Belt Module
(REP
9.15).
10. Remove Xerographic Release Lever
11. Remove Xerographic Release Lever Brackets
a.
Remove Screws (2) and remove Bracket.
b.
Remove Screws (2) and remove Bracket.
Screws
(2)
Figure 1 Removing Xerographic Release Lever
Replacement
Move Xerographic Release Lever to down position before reinstalling Belt Module.
6/02
4-81
WARNING
14.8).
9.4).
(REP
9.3).
(REP
14.10).
(REP
9.18).
(Figure
1).
Screws
(2)
Repairs and Adjustments
REP 9.18, REP 9.19