Xerox DocuColor 1632 Service Manual page 230

12-120 Compiler Entrance Sensor On
The Compiler Entrance Sensor did not detect paper.
Procedure
Enter dC330 [012-101] and press Start. Actuate and deactuate the Complier Entrance Sen-
sor. The display changes.
Y N
Check the circuit of the Complier Entrance Sensor
Check the following:
ï Complier Entrance Sensor Actuator for breakage and bending
ï Paper path failure for burr and foreign substance.
ï Decurler Roll/pinch Roll for a drive failure
ï Drive Transmission Gear from the Finisher Drive Motor for wear and breakage
Compiler
Entrance
Sensor
Figure 1 Component Location
Figure 2 Compiler Entrance Sensor CD
Status Indicator RAPs
12-120
(Figure 2).
Decurler Clutch
Home
Sensor
6/02
2-200
Figure 3 Finisher PWB
Prelaunch Training/Review
DC1632/2240