Xerox DocuColor 1632 Service Manual page 231

12-122 Compiler Entrance Sensor Off
Paper does not deactuate the Compiler Entrance Sensor.
Procedure
Make a copy and observe paper in the Compiler Tray. The copy enters the Compiler Tray.
Y N
There is a drives problem. Check the following:
ï The paper path failure for burr and foreign substance.
ï The Drive Transmission Gear from the Finisher Drive Motor for wear and breakage
ï The Decurler Roll/pinch Roll for a drive failure
ï The Compiler Entrance Roll for a drive failure
Repair the sensor as required (PL 17.4) for mechanical problems. If the sensor is mechani-
cally good, replace the Compiler Entrance Sensor.
Compiler
Entrance
Sensor
Figure 1 Component Location
Prelaunch Training/Review
DC1632/2240
Decurler Clutch
Home
Sensor
6/02
2-201
Status Indicator RAPs
12-122