REP 6.14 Lamp Wire Harness
Parts List on
PL 18.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove DADF
(REP
5.1).
2.
Remove Platen Glass
(REP
6.2).
3.
Remove IIT Top Cover
(REP
6.3).
4.
Disconnect Lamp Wire Harness connector and release Clamp Hook
a.
Disconnect connector.
b.
Release clamp.
c.
Remove clamp.
d.
Release hook.
Figure 1 Disconnecting Lamp Wire Harness
Prelaunch Training/Review
DC1632/2240
WARNING
(Figure
5.
Remove Full Rate Carriage
a.
Remove screws (2).
b.
Remove Full Rate Carriage.
1).
6/02
4-51
(Figure
2).
Figure 2 Removing Full Rate Carriage
Repairs and Adjustments
REP 6.14