Xerox DocuColor 1632 Service Manual page 779

Chain-Link Name
710-812 ADF RegiSNR Off NonInvert Dynamic-
Jam Count Total
710-813 ADF Regi SNR Off Dynamic Jam Count
Since Reset
710-814 ADF Regi SNR On Dynamic Jam Count
Total (invert)
710-815 ADF RegiSNROn DynamicJamCount
Since Reset (invert)
710-816 ADF Regi SNR Off Dynamic Jam Count
Total (invert)
710-817 ADF RegiSNROffDynamicJamCount
Since Reset (invert)
710-818 ADF Exit Sensor On Dynamic Jam
Count Total
710-819 ADF Exit Sensor On Dynamic Jam
Count Since Reset
710-820 ADF Exit Sensor Off Dynamic Jam
Count Total
710-821 ADF Exit Sensor Off DynamicJam
Count Since Reset
710-822 Size Mismatch Jam Count Total
710-823 Size Mismatch Jam Count Since Reset 0
710-900 Feed Life Count (upper digits)
710-901 Feed Life Count (lower digits)
715-xxx IIT NVM List
Chain-Link Name
715-001 PreIPS Fail Bypass
715-004 ACS Detection Level
715-014 PRadjF
715-015 DADF FS Offset
715-016 Side Registration Shift (-)
715-017 COSAC FS1x5 Filter
715-018 COSAC Special Feature (Setting range
is TBD)
715-051 AOCerr
715-080 Pshad (1)
715-081 Pshad (2)
715-082 Pshad (3)
Prelaunch Training/Review
DC1632/2240
Table 2 Chain 710
Default Range Description
0 0~65535 Cumulative Jam Counter (Write not permitted)
0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
0 0~65535 Cumulative Jam Counter (Write not permitted)
0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
0 0~65535 Cumulative Jam Counter (Write not permitted)
0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
0 0~65535 Cumulative Jam Counter (Write not permitted)
0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
0 0~65535 Cumulative Jam Counter (Write not permitted)
0 0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
0 0~65535 Cumulative Jam Counter (Write not permitted)
0~65535 Cumulative Jam Counter at the previous clearing (Write not permitted)
36 0~65535 Feed Count Replacement Life (Upper digits) (Write not permitted)
40704 0~65535 Feed Count Replacement Life (Lower digits) (Write not permitted)
Table 3 Chain 715
Default Range Description
0 0~1 0 = Fail Bypass is not available, 1 = Fail Bypass is available
2 0~4 Level 0 (judged from Black and White)~Level 4 (judged from Color)
120 0~240 Fast Scan Direction Regi Correction Value (Dot) Adjustment at factory. VLSS=PROMVLSS+PRadjF -120 -
Shift Amount
71 0~150 Fast Scan Offset Value (Dot) when DADF is used. VLSS=PROMVLSS+PRadjF -120 +DADF Offset- Shift
Amount, Adjustment at factory. (DUP Side can be used too)
0 0~256 For VLSS=PROMVLSS+PRadjF - 120 - Shift Amount and (Dot) Regi adjustments.
0 0~1 0 = OFF, 1 = ON (Moire reduction)
0 0~2047 bit 0 -> 0 = Normal, 1 = LSWIDE LineSync Active large width bit 1 -> 0 = Normal, 1 = AGOC Cancel, Manual
Setup from NVM-AGCP, AOCP. bit 2 -> 0 = Normal, 1 = Forward revolution output (ONPF=0)
0 0~255 No. of times the AOC flow has ended in an abnormal way.
148 115~255 Red W-Ref Correction Coefficient Adjustment at factory.
158 115~255 Green W-Ref Correction Coefficient Adjustment at factory.
165 115~255 Blue W-Ref Correction Coefficient Adjustment at factory.
6/02
6-15
General Procedures and Information