REP 7.11 Tray 3 Feeder
Parts List on
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Remove Tray 2.
2.
Pull out Tray 3 and Tray 4.
3.
Open the Left Cover.
4.
Remove the Lower Chute.
5.
Remove the Tray 3 Feeder Assembly
1
Remove
Screws (2)
4
Remove Screws
(2) and Tray 3
Feeder Assembly
Figure 1 Removing the Tray 3 Feeder Assembly
Repairs and Adjustments
REP 7.11
WARNING
(Figure
1).
2
3
Release Wire
Loosen
Harness and
Screw (1)
disconnect P/J
6.
Remove the Tray 3 Feeder from mounting bracket
Figure 2 Removing Tray 3 Feeder from Bracket
6/02
4-60
(Figure
2).
Remove the
Screws (2)
and Bracket
Prelaunch Training/Review
DC1632/2240