Dc355 Hard Disk Diagnostic Program; Dc371 Configuration Page - Xerox DocuColor 1632 Service Manual

dC355 Hard Disk Diagnostic Program

Purpose
NOTE: For details on dC355 Hard Disk Diagnostic Program, see Adjustments:
General Procedures and Information
dC355, dC371

dC371 Configuration Page

Purpose
Allows easy viewing and set-up of machine configuration.
ADJ 9.8.
Procedure
1. Enter the Diagnostic Mode. Refer to
2. Select Adjustments on the Service Entry Screen.
3. Select NVM Init, S/R (the default screen).
4. Select Configuration Page (dC371). The Configuration Page Screen is displayed.
5. Make selections on the screen from the following categories:
a.
Market Place
ï XC (NASG)
ï XE (ESG)
ï FX
ï FX / AP
b.
Machine Config
ï Digital Copier
ï Copier / Printer
ï Copier / Printer / Scanner
ï Printer with UI
c. Output Device(s)
ï Simple Catch Tray
ï Ofssetting Catch Tray
ï Finisher
d. Input Device
ï DADF
ï Platen Only
6. Select Save to save the options or select Reset to reset the default settings back to origi-
nal options prior to entering Configuration Page (dC371).
6/02
6-78
Entering Diagnostic Mode using the PWS.
Prelaunch Training/Review
DC1632/2240