Xerox DocuColor 1632 Service Manual page 416

116-361 Spool Fatal HD
Fatal error of the SPL HD
The spoolCont detected an error at HD access.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Run the HD Diag (DC355).
Replace the HD (PL 13.1).
If the problem continues, replace the ESS PWB
Status Indicator RAPs
116-361, 116-365
(PL 13.1).
116-365 Spool Fatal
Fatal error of the SPL
Due to an error during the software processing, the subsequent processes cannot be per-
formed.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Perform re-installation of the ESS software.
If the problem continues, replace the ESS PWB
6/02
2-386
(PL 13.1).
Prelaunch Training/Review
DC1632/2240