A Hp-Gl Command Error Was Detected; Plw Form Registry Error - Xerox DocuColor 1632 Service Manual

116-714 A HP-GL command error was detected

[Detection Conditions] HP-GL/2 command error
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Correct or remove the data in the print data that causes the error.
Prelaunch Training/Review
DC1632/2240

116-715 PLW form registry error

The PLW form data cannot be registered because of the restriction of the number of forms.
Procedure
Switch power off then on. The problem continues.
Y N
Return to service call procedures.
Use the Operation Panel to check the registered forms, and delete unnecessary ones. Or
delete unnecessary forms.
6/02
2-401
Status Indicator RAPs
116-714, 116-715