Xerox DocuColor 1632 Service Manual page 163

8-626 Regicon Sample Block (A1 Patch-front)
At A1 (OUT) patch detection, the number of the sample blocks does not reach the specified
number.
NOTE: Status Code not displayed on UI. Machine operation continues.
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform DC685 Color Registration (ADJ
Prelaunch Training/Review
DC1632/2240
9.6).
8-627 Regicon Sample Lateral (A1 Patch-rear)
At A1 (IN) patch detection, the Fast Scan scan position of CYAN color that is the standard for
the rest is incorrect. (Against the MOB SENSOR, the center position of the CYAN pattern is
shifted by ±500 m or more.)
NOTE: Status Code not displayed on UI. Machine operation continues.
Procedure
Check the IBT Belt and Drum for a scratch or contamination. The check is OK.
Y N
Replace as required.
Perform DC685 Color Registration
6/02
2-133
(ADJ 9.6).
Status Indicator RAPs
8-626, 8-627