Xerox DocuColor 1632 Service Manual page 522

3. Install Carriage Cable (spring hook side)
a. Hook cable to pulley (from bottom to top).
b. Hook cable to small pulley in Half Rate Carriage (from bottom to top).
c. Hook cable to stud (from bottom to top).
d. Install spring on cable (spring hook side).
e. Hook spring onto frame.
Figure 9 Installing Carriage Cable (spring hook side)
Repairs and Adjustments
REP 6.11
(Figure 9). 4. Remove tape from cable.
5. Install Full Rate Carriage in IIT Frame.
6. Adjust positions of Full Rate/Half Rate Carriages
7. Manually move Full Rate Carriage to make sure it moves smoothly.
8. Install remaining parts.
6/02
4-48
(ADJ 6.1).
Prelaunch Training/Review
DC1632/2240