102-370 Interface Length
Interface length failure. The parameter notified from the Controller was incorrect.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
Status Indicator RAPs
102-370, 102-371
102-371 Interface Parameter
Interface parameter failure. The parameter notified from the Controller was incorrect.
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
6/02
2-338
Prelaunch Training/Review
DC1632/2240