Xerox DocuColor 1632 Service Manual page 166

8-900 Static Jam
When the machine power is turned off then on before a paper path fault is cleared, an 8-900
fault will be displayed. A voltage drop or interruption can also cause this fault.
Initial Actions
ï Check the entire paper path for paper or obstructions.
ï Clean all the paper path sensors.
ï Check the Fault History for the last paper path fault. Go to that paper path fault RAP.
Procedure
In sequence, enter the following dC330 codes:
Block and unblock each sensor
ï 8-100 Tray 1 Mis-feed, (7-105).
ï 8-106 Tray 2 Mis-feed, (7-110).
ï 8-102 Tray 3 Mis-feed, (7-115).
ï 8-103 Tray 4 Mis-feed, (7-119).
ï 8-104 Registration Sensor, (8-175).
ï 9-201 POB On Jam, (8-164)
The display for each code changes.
Y N
Go to the appropriate paper path fault RAP.
Check the machine input voltage, if the problem continues, replace the ESS PWB (PL 13.1).
Status Indicator RAPs
8-900
6/02
2-136
Prelaunch Training/Review
DC1632/2240