Before You Begin; Safety Summary; Do Not Repair Or Adjust Alone; First Aid - Intermec EasyCoder PX4i User Manual

Before You Begin

Before You Begin

Safety Summary

x
This section provides you with safety information, technical
support information, and sources for additional product
information.
Your safety is extremely important. Read and follow all
warnings and cautions in this document before handling
and operating Intermec equipment. You can be seriously
injured, and equipment and data can be damaged if you do
not follow the safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under
any circumstances. Someone capable of providing first aid
must always be present for your safety.

First aid

Always obtain first aid or medical attention immediately
after an injury. Never neglect an injury, no matter how
slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and
stops breathing. Any delay could result in death. To work
on or near high voltage, you should be familiar with
approved industrial first aid methods.

Energized equipment

Never work on energized equipment unless authorized by a
responsible authority. Energized electrical equipment is
dangerous. Electrical shock from energized equipment can
cause death. If you must perform authorized emergency
work on energized equipment, be sure that you comply
strictly with approved safety regulations.
EasyCoder PX4i User's Guide (IPL Version)