Print A Test Label In Start Up Mode; Print A Test Label In Idle Mode; Print A Test Label From The Main Menu - Intermec PC23 User Manual

Print a Test Label in Start Up Mode

Print a Test Label in Idle Mode

Print a Test Label from the Main Menu

PC23 and PC43 Desktop Printer User Manual
You can print a test label when you first turn on the printer.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 Connect the printer to power and turn on the printer.
3 On the icon printer, when the last two LEDs are lit (Maintenance
and Bluetooth), press and hold
print.
On the LCD printer, when the status bar appears, press and hold
until the Media Calibration Wizard appears. Select
press to print a label with the current print settings.
You can print a test label when the printer is in Idle mode.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 On the icon printer, press and hold
print.
On the LCD printer, press and hold
Calibration Wizard appears. To print a label with the current print
settings, select
If you have an LCD printer, you can print a test label from the Main
Menu.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 From the Ready screen, press
until the test label starts to
and press .
.
Chapter 2 — Set Up the Printer
until the test label starts to
until the Media
and
61