Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
18
Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.
19
Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.
Return to Task List
Resolve alarms
Return to Task List
1
Type
display alarms
2
Examine the alarm log.
3
Resolve any alarms.
Return to Task List
Restore busyouts
Return to Task List
1
Restore any busyouts that you removed in the
Return to Task List
Restore announcements (TN750 or TN750B
only)
Return to Task List
1
Insert the white flash card with the saved announcements.
2
Type
restore announcements
This command takes about 45 minutes to execute.
Return to Task List
Check SPE
1
Type
status system 1
Check these fields for the corresponding values:
—
Maj/Min alarms
— Service State = in (service)
Return to Task List
60
and press Return.
Verify system status
and press Return.
and press Return.
= 0
section prior to the upgrade.
SI Installation and Upgrades
June 2004