Save Announcements (Tn750 Or Tn750B Only); Shut Down Definity Lan Gateway - Avaya MCC1 Installation And Upgrades

3
Ensure that the
is anything else, the translations were not copied to the flashcard. If the translations are corrupted,
the following error message appears when logging in:
!
Translation corruption detected; call Avaya immediately.
4
If the
save translation
screen and escalate the problem immediately.
5
Remove the translation card from the slot. Keep the translation media in a safe and secure place.
In case of failure, use this translation to restore the system.
Return to Task List

Save announcements (TN750 or TN750B only)

Return to Task List
NOTE:
Use this procedure only for configurations with the TN750 or TN750B announcement
circuit pack. You do not need to save announcements on the TN750C or TN2501AP
integrated announcement circuit packs, which contain on-board, nonvolatile memory.
To determine whether the system has recorded announcements
1
Type display announcements
If no recorded announcements are listed, you do not have to save announcements.
NOTE:
If none of the announcements has changed since they were last saved, you do not have to
save announcements. If there is any doubt, save the announcements anyway.
2
Type
save announcements UUCSS
Saving announcements takes about 40 minutes.
Return to Task List

Shut down DEFINITY LAN Gateway

Return to Task List
!
Neglecting to shut down the LAN Gateway assembly before powering down the system
cabinet can damage the LAN Gateway disk.
1
Log onto the DEFINITY LAN Gateway.
2
From the main menu, select Maintenance > Reset System > Shutdown.
Return to Task List
SI Installation and Upgrades
June 2004
Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
command was successful (Error Code must be zero). If the value
save translation
WARNING:
command fails, do not continue. Record the error code that appears on the
and press Return.
WARNING:
and press Return.
49