Add Packet Bus Support (Isdn Pri); Add Circuit Packs (Isdn Pri); Install Cables (Isdn Pri); Enter Added Translations (Isdn Pri) - Avaya MCC1 Installation And Upgrades

Install and Administer Trunks
Install ISDN—PRI Trunks

Add Packet Bus Support (ISDN PRI)

Return to Task List
If packet bus support is not already installed, see
steps.

Add Circuit Packs (ISDN PRI)

Return to Task List
4
Determine port assignment of circuit packs to be added.
5
Install the DS1 Interface circuit pack in the assigned carrier slot.
6
Install a TN748B (or later) (or the international TN420B/C) Tone Detector circuit pack if
required.

Install Cables (ISDN PRI)

Return to Task List
Install cables from cabinet to MDF as required.

Enter Added Translations (ISDN PRI)

Return to Task List
Administer the forms listed under "Integrated Services Digital Network — Primary Rate Interface" in the
Administrator's Guide for Avaya™ Communication Manager (555-233-506).

Resolve Alarms (ISDN PRI)

Return to Task List
1
Examine the alarm log.
2
Resolve any alarms that may exist using the Maintenance for Avaya DEFINITY® Server SI (555-
233-123) documentation.

Save Translations (ISDN PRI)

Return to Task List
1
If the system is High or Critical Reliability, type
the system is in the
2
Type
save translation
information in memory and write it to the translation cards.
3
Update backup cards, if necessary.
668
Add Packet Bus Support
mode.
active/standby
and press Enter. This instructs the system to take all translation
on page 588 and perform the
and press Enter to verify that
status system 1
SI Installation and Upgrades
June 2004