Check existing software load [from
G3V4vs/R5vs/R6vs]
Return to Task List
1
Type
list configuration software-versions memory-resident
2
Record the software load.
Verify system status [from G3V4vs/R5vs/R6vs]
Return to Task List
1
Verify that system status is normal.
Execute
2
Verify that the system is alarm-free.
Execute
3
Identify and record customer-placed busy-outs.
Execute
placed by the customer.)
NOTE:
You will restore the customer-placed busy-outs after you have upgraded the system.
4
For a system that has existing BX.25 links that are being retained after the upgrade: identify and
record them.
Execute
5
Execute the following commands and verify that the information is correct:
list station
list trunk-group
list hunt-group
list data-module
For upgrades from systems later than G1,
For a system with Expert Agent later than G3V3,
If any command does not complete successfully, escalate the problem immediately.
Return to Task List
SI Installation and Upgrades
June 2004
(If status is not normal, take the needed corrective actions.)
status system 1
(If the system is not alarm-free, take the needed corrective actions.)
display alarms
(Examine the error log and record the error 18s that identify the busy-outs
display errors
display communication-interface links
G3V4vs/R5vs/R6vs to Avaya Communication Manager
Task List: DEFINITY vs to Avaya Communication Manager
and press Enter.
list ars analysis
list agent
151