Save Announcements And Translations - Avaya MCC1 Installation And Upgrades

Save announcements and translations

Return to Task List
1
Insert the translation card(s) into the TN2401 (Netcon/Pkt Intf) circuit pack(s).
2
Type
save announcements
NOTE:
Use this step only for configurations with the TN750 or TN750B announcement circuit
pack. Skip this step for the TN750C or TN2501AP integrated announcement circuit packs,
which contain on-board, nonvolatile memory.
This takes about 45 minutes.
3
Type
save translation
This takes about 20 minutes.
NOTE:
Do not press any keyboard key until after the screen shows the success message. For
example, if you press Enter more than once after typing the command, the second Enter
erases the screen and you never see the success message.
NOTE:
If the
on the screen and escalate the problem immediately.
Keep the translation media in a safe and secure place.
Return to Task List
SI Installation and Upgrades
June 2004
Release 9si/10si/Communication Manager 1.x to Communication Manager 2.1
Task list: R9si/10si/Communication Manager 1.x to Communication Manager 2.1
and press Return.
and press Return.
save translation command fails, do not continue. Record the error code that appears
61