Save Translation [From R5/R6/R7/R8Si] - Avaya MCC1 Installation And Upgrades

6
Type
display communication-interface processor-channels
7
For each processor channel where the Application field is ISDN, record the information in all
fields.
If you must back out of the upgrade, you will need this information.
8
Type
change communication-interface processor-channels
9
For each processor channel where the Application field is ISDN, clear the information from
all fields and press Enter.
10
Type
change communication-interface links
11
For each PI extension where the Prot field is ISDN make these entries:
Field
Est Conn
Prot
DTE/DCE
Identification
12
Press Enter.
13
For each PI extension where the Application field is ISDN:
a
Type
field.
If you must back out of the upgrade, you will need this information.
b
Type
Return to Task List

Save translation [from R5/R6/R7/R8si]

Return to Task List
NOTE:
To save translations on duplicated systems, the systems must be in sync or the command
will fail.
For High and Critical Reliability only, execute
Verify that conditions are normal (this can take as long as 5 to 10 minutes). If the system refuses to go
into a normal condition, refer to the maintenance procedures; if that fails, escalate the problem.
1
Type save translation
This takes about 10 minutes.
NOTE:
Do not press any keyboard key until after the terminal displays the success message. For
example, if you press Enter more than once after typing the command, the second Enter
erases the screen and you never see the success message.
SI Installation and Upgrades
June 2004
Task List: R5/R6/R7/R8si to Avaya Communication Manager
Value
n
bx25
dte
[blank]
[
display data-module PI EXT
[
remove data-module PI EXT
status system 1
and press Enter.
R5/R6/R7/R8si to Avaya Communication Manager
and press Enter.
and press Enter.
and press Enter.
] and press Enter. Record the information in each
] and press Enter.
before you save translations.
115