Rerecord Announcements [From G3V4Vs/R5Vs/R6Vs]; Save Announcements And Translation [From G3V4Vs/R5Vs/R6Vs] - Avaya MCC1 Installation And Upgrades

G3V4vs/R5vs/R6vs to Avaya Communication Manager
Task List: DEFINITY vs to Avaya Communication Manager
Rerecord announcements [from
G3V4vs/R5vs/R6vs]
Return to Task List
If you have not saved and restored announcements during the upgrade, the customer must re-record all
announcements now.
If the customer changed any announcements after the they provided the source tape for the blowback
flash card, the customer must re-record the new announcements.
Return to Task List
Save announcements and translation [from
G3V4vs/R5vs/R6vs]
Return to Task List
1
Remove the original translation card(s) from the TN2401 NetPkt circuit packs. These cards are
not formatted to be used with the new TN2401.
2
Insert the new translation card(s) into the TN2401 circuit packs.
3
Type save announcements
NOTE:
Use this step only for systems equipped with the TN750 or TN750B announcement circuit
pack.
This takes about 45 minutes.
4
Type
save translation
translation card, which takes about 20 minutes.
NOTE:
It takes longer to save translations to the new, larger flashcards.
NOTE:
Do not press any keyboard key until after the screen displays the success message. For
example, if you press Enter more than once after typing the command, the second Enter
erases the screen and you never see the success message.
NOTE:
If the
on the screen and escalate the problem immediately.
Keep the translation media in a safe and secure place.
170
and press Enter.
and press Enter to copy upgraded translations in memory to the new
command fails, do not continue. Record the error code that appears
save translation
SI Installation and Upgrades
June 2004