Restore Announcements (Tn750 Or Tn750B Only) [From R5/R6/R7/R8Si]; Rerecord Announcements [From R5/R6/R7/R8Si]; Check Spe [From R5/R6/R7/R8Si] - Avaya MCC1 Installation And Upgrades

8
Test Remote Access Interface
9
Test Basic Rate Interface
10
Test Duplication Option Processing
11
Element Interchange
12
Test Terminating Trunk Transmission
13
Test Stratum 3 Clock
14
Perform Complete System Test
15
Activate and Test Alarm Origination Feature
Return to Task List
Restore announcements (TN750 or TN750B
only) [from R5/R6/R7/R8si]
Return to Task List
1
Insert the white flash card with the saved announcements.
2
Type
restore announcements
This command takes about 45 minutes to execute.
Rerecord announcements [from
R5/R6/R7/R8si]
Return to Task List
If you have not saved and restored announcements during the upgrade, the customer must re-record all
announcements now.
If the customer changed any announcements after the they provided the source tape for the blowback
flash card, the customer must re-record the new announcements.

Check SPE [from R5/R6/R7/R8si]

Return to Task List
1
Type status system 1
SI Installation and Upgrades
June 2004
R5/R6/R7/R8si to Avaya Communication Manager
Task List: R5/R6/R7/R8si to Avaya Communication Manager
and press Enter.
and press Enter.
133