Task List: Administer The System - Avaya MCC1 Installation And Upgrades

Bring the System Online

Task List: Administer the System

Task List: Administer the System
1
Log in to the System
2
Deliver or install the License File
3
Administer no-license/emergency numbers
4
Change Site Data (MCC1 only)
5
Change Cabinet 1 (MCC1 only)
6
Add Cabinet 2 through N (AvayaDEFINITY Server r)
7
Set Country Options
8
Change the Password
9
Set Daylight Savings Rules
10
Set Date and Time
Log in to the System
Return to Task List
1
Log in as craft.
NOTE:
If you have a dadmin login and password, you can use them instead of craft and the craft
password. You may have to contact Avaya to get the dadmin password.
2
Verify the screen displays
3
Type the default password and press Enter.
For security reasons, the password is not displayed as it is typed. The system verifies a valid login
and password name were entered.
4
If an invalid login or password name was entered, the screen displays
this case, repeat the procedure using the correct login and matching password.
5
If the system recognizes the login and password name, the screen displays the software version.
Verify the screen display is similar to:
Terminal Type (513, 715, 4410, 4425, VT220): [715]
6
Type the number of the management terminal and press Enter.
7
Verify the screen displays
Return to Task List
Deliver or install the License File
Return to Task List
CAUTION:
This procedure must be done immediately after you upgrade the software. If the license
file is not installed within 10 days, the switch enters a No-License mode and shuts down
all call processing.
464
on page 464
on page 464
on page 467
on page 467
on page 467
on page 470
on page 472
on page 473
on page 474
password:
command:
on page 469
login incorrect:
SI Installation and Upgrades
In
June 2004